:REM "Initialize the custom mask"
:MASK:CUSTom INIT
:REM "Mask Setup Information"
:MASK:USER:LABEL ""
:MASK:USER:AMPLITUDE 1.0000
:MASK:USER:VSCALE 200.0000E-3
:MASK:USER:VPOS -2.5000
:MASK:USER:VOFFSET 0.0E+0
:MASK:USER:HSCALE 1.0000E-6
:MASK:USER:HTRIGPOS 305.0000E-3
:MASK:USER:WIDTH 3.9000E-6
:MASK:USER:RECORDLENGTH 1000
:MASK:USER:TRIGTOSAMP 1.9500E-6
:MASK:MARGIN:PERCENT 0.0E+0
:REM "Mask points are defined as x,y pairs in seconds,volts units"
:REM "Points in a segment must be defined in counter clockwise order"
:REM "A single point at 0,0 indicates an empty segment"
:MASK:USER:SEG1:POINTS -1.9500E-6,100.0000E-3,-1.3260E-6,100.0000E-3,-195.0000E-9,500.0000E-3,-195.0000E-9,1.2000,1.9500E-6,1.1000,4.0950E-6,1.2000,4.0950E-6,500.0000E-3,5.2260E-6,100.0000E-3,5.8500E-6,100.0000E-3,5.8500E-6,1.5000,-1.9500E-6,1.5000
:MASK:USER:SEG2:POINTS -1.9500E-6,-500.0000E-3,5.8500E-6,-500.0000E-3,5.8500E-6,-100.0000E-3,3.7050E-6,-200.0000E-3,3.7050E-6,500.0000E-3,3.5100E-6,800.0000E-3,1.9500E-6,900.0000E-3,390.0000E-9,800.0000E-3,195.0000E-9,500.0000E-3,195.0000E-9,-200.0000E-3,-1.9500E-6,-100.0000E-3
:MASK:USER:SEG3:POINTS 0.0E+0,0.0E+0
:MASK:USER:SEG4:POINTS 0.0E+0,0.0E+0
:MASK:USER:SEG5:POINTS 0.0E+0,0.0E+0
:MASK:USER:SEG6:POINTS 0.0E+0,0.0E+0
:MASK:USER:SEG7:POINTS 0.0E+0,0.0E+0
:MASK:USER:SEG8:POINTS 0.0E+0,0.0E+0