:REM "Initialize the custom mask"
:MASK:CUSTom INIT
:REM "Mask Setup Information"
:MASK:USER:LABEL ""
:MASK:USER:AMPLITUDE 1.0000
:MASK:USER:VSCALE 144.0000E-3
:MASK:USER:VPOS 0.0E+0
:MASK:USER:VOFFSET 0.0E+0
:MASK:USER:HSCALE 1.0000E-9
:MASK:USER:HTRIGPOS 239.6250E-3
:MASK:USER:WIDTH 2.0830E-9
:MASK:USER:RECORDLENGTH 1000
:MASK:USER:TRIGTOSAMP 1.0415E-9
:MASK:MARGIN:PERCENT 0.0E+0
:REM "Mask points are defined as x,y pairs in seconds,volts units"
:REM "Points in a segment must be defined in counter clockwise order"
:REM "A single point at 0,0 indicates an empty segment"
:MASK:USER:SEG1:POINTS 0.0E+0,575.0000E-3,2.0830E-9,575.0000E-3,2.0830E-9,750.0000E-3,0.0E+0,750.0000E-3
:MASK:USER:SEG2:POINTS 208.3000E-12,0.0E+0,833.2000E-12,-275.0000E-3,1.2498E-9,-275.0000E-3,1.8747E-9,0.0E+0,1.2498E-9,275.0000E-3,833.2000E-12,275.0000E-3
:MASK:USER:SEG3:POINTS 0.0E+0,-750.0000E-3,2.0830E-9,-750.0000E-3,2.0830E-9,-575.0000E-3,0.0E+0,-575.0000E-3
:MASK:USER:SEG4:POINTS 0.0E+0,0.0E+0
:MASK:USER:SEG5:POINTS 0.0E+0,0.0E+0
:MASK:USER:SEG6:POINTS 0.0E+0,0.0E+0
:MASK:USER:SEG7:POINTS 0.0E+0,0.0E+0
:MASK:USER:SEG8:POINTS 0.0E+0,0.0E+0